Compare software

Compare SuperSlicer with alternatives

• SuperSlicer vs PrusaSlicerPrusaSlicer is the upstream SuperSlicer tracks, with a less dense interface, Prusa Research maintenance and no account needed, but it has fewer calibration tools and fine-tuning settings.
• SuperSlicer vs Bambu StudioBambu Studio is another PrusaSlicer fork, adding multi-material painting and remote monitoring, but it is built around Bambu Lab hardware and pushes towards a Bambu account.
• SuperSlicer vs OrcaSlicerOrcaSlicer also has built-in calibration tests plus scarf seams and wall spacing control, with frequent releases and Linux AppImage, Flatpak and ARM64 builds.
• SuperSlicer vs UltiMaker CuraUltiMaker Cura is LGPL-3.0 licensed, with profiles for hundreds of printers and recommended presets, but its calibration tooling is thinner than SuperSlicer's.
• SuperSlicer vs IceSLIceSL is free but closed source, adds a scriptable modeller for procedural infill and geometry, and has thinner documentation and printer profiles.
• SuperSlicer vs Creality PrintCreality's official slicer for preparing models and sending prints to its FDM 3D printers.
• SuperSlicer vs KISSlicerKISSlicer is a fast, simple closed-source slicer with far fewer settings, and its free version is limited to a single extruder.
• SuperSlicer vs Snapmaker OrcaSnapmaker's fork of the OrcaSlicer slicer, tuned for Snapmaker 3D printers.
• SuperSlicer vs QIDI StudioQIDI's official open-source slicer that prepares 3D models for printing on QIDI printers.
• SuperSlicer vs ideaMakerideaMaker is Raise3D's free but closed-source slicer, and its printer profiles and advanced features depend on supported hardware.
• SuperSlicer vs ElegooSlicerELEGOO's open-source FDM slicer, based on OrcaSlicer, for Centauri, Neptune and other FDM printers.
• SuperSlicer vs FlashPrintFlashForge's own slicer that prepares 3D models for printing on FlashForge 3D printers.
• SuperSlicer vs Dremel DigiLab 3D SlicerA Cura-based 3D printing slicer for Dremel DigiLab printers that works without an internet connection.
• SuperSlicer vs Simplify3DSimplify3D is a closed-source commercial slicer requiring a paid license, with configurable processes, support generation and toolpath controls.
• SuperSlicer vs mslicerSlice 3D models for resin printers.
• SuperSlicer vs Orca-FlashforgeFlashforge's slicer based on OrcaSlicer, tuned for its Adventurer and AD5X 3D printers.
• SuperSlicer vs Lychee SlicerA resin-focused slicer with a free tier, strong automatic supports and a large printer profile library.
• SuperSlicer vs ChiTuBox BasicResin 3D printing slicer that prepares models for SLA, DLP and LCD machines.
• SuperSlicer vs Kiri:MotoGenerate 3D-printing and CNC toolpaths in a browser.
• SuperSlicer vs Formware 3DPrint-preparation software for DLP, resin and inkjet 3D printers, including support generation.