Compare software

Dremel DigiLab 3D SlicerPrusaSlicer

Best for: Owners of Dremel DigiLab 3D printers

Best for: Slicing on a Prusa, or for a resin printer, without an account

Free

Downloadable from the vendor's site and included on the USB stick that ships with Dremel printers.

 Free

Free and open source under the AGPL 3.0. No account is required to use it.

Windows, macOS Windows, macOS, Linux
  • Ready-made profiles for Dremel DigiLab printers
  • Slices locally without an internet connection
All 3 strengths
  • Ready-made profiles for Dremel DigiLab printers
  • Slices locally without an internet connection
  • Also works with other Cura-supported printers
  • Handles both filament and resin printers in one program
  • Per-layer setting changes and painted supports and seams
All 4 strengths
  • Handles both filament and resin printers in one program
  • Per-layer setting changes and painted supports and seams
  • Profiles for printers well beyond Prusa's own range
  • No account needed, and the project says so plainly
  • Mainly useful to owners of Dremel printers
  • Older operating system versions are not optimized for
All 3 limitations
  • Mainly useful to owners of Dremel printers
  • Older operating system versions are not optimized for
  • 3D20 printers need a recent firmware version
  • Linux builds come only through Flathub
  • Tuned first for Prusa hardware; other machines need profile work
All 3 limitations
  • Linux builds come only through Flathub
  • Tuned first for Prusa hardware; other machines need profile work
  • The interface exposes fewer calibration tools than OrcaSlicer
Downloadable app Downloadable app
Not open source Open source
License not stated License: AGPL-3.0
No account needed No account needed
Offline features available Offline features available
Sources

Catalog checked October 2, 2026
Sources

Catalog checked September 21, 2026

“Not stated” means we have not confirmed it. Features can vary by device and plan.