Compare software

PrusaSlicerDremel DigiLab 3D Slicer

Best for: Slicing on a Prusa, or for a resin printer, without an account

Best for: Owners of Dremel DigiLab 3D printers

Free

Free and open source under the AGPL 3.0. No account is required to use it.

 Free

Downloadable from the vendor's site and included on the USB stick that ships with Dremel printers.

Windows, macOS, Linux Windows, macOS
  • Handles both filament and resin printers in one program
  • Per-layer setting changes and painted supports and seams
All 4 strengths
  • Handles both filament and resin printers in one program
  • Per-layer setting changes and painted supports and seams
  • Profiles for printers well beyond Prusa's own range
  • No account needed, and the project says so plainly
  • Ready-made profiles for Dremel DigiLab printers
  • Slices locally without an internet connection
All 3 strengths
  • Ready-made profiles for Dremel DigiLab printers
  • Slices locally without an internet connection
  • Also works with other Cura-supported printers
  • Linux builds come only through Flathub
  • Tuned first for Prusa hardware; other machines need profile work
All 3 limitations
  • Linux builds come only through Flathub
  • Tuned first for Prusa hardware; other machines need profile work
  • The interface exposes fewer calibration tools than OrcaSlicer
  • Mainly useful to owners of Dremel printers
  • Older operating system versions are not optimized for
All 3 limitations
  • Mainly useful to owners of Dremel printers
  • Older operating system versions are not optimized for
  • 3D20 printers need a recent firmware version
Downloadable app Downloadable app
Open source Not open source
License: AGPL-3.0 License not stated
No account needed No account needed
Offline features available Offline features available
Sources

Catalog checked September 21, 2026
Sources

Catalog checked October 2, 2026

“Not stated” means we have not confirmed it. Features can vary by device and plan.