SuperSlicer vs mslicer: catalog facts
 SuperSlicer |  mslicer |
|---|
|
Best for: Squeezing better surface quality out of an FFF printer through fine-grained settings |
Best for: Slice 3D models for resin printers |
|
Free Free and open source under the AGPL. |
Free The open-source software is available without a license fee. Hosting, hardware and external services are separate. |
|
Windows, macOS, Linux |
Windows, macOS, Linux |
- Generates its own calibration test prints instead of making you find models
- Fine-grained top-surface settings including only-one-perimeter-on-top
All 4 strengths for SuperSlicer- Generates its own calibration test prints instead of making you find models
- Fine-grained top-surface settings including only-one-perimeter-on-top
- Better thin-wall handling, anchored into the print rather than left loose
- Handles FFF G-code and masked SLA PNG layers from one program
|
- Exports several resin-print formats including CTB and GOO.
|
- The author states the Linux and macOS builds are compiled but not tested by them
- The last tagged stable release is from 2024, with newer work in nightly builds
All 4 limitations for SuperSlicer- The author states the Linux and macOS builds are compiled but not tested by them
- The last tagged stable release is from 2024, with newer work in nightly builds
- The extra settings make an already dense interface denser
- A single-maintainer fork tracking PrusaSlicer upstream
|
- Check that your printer accepts one of its output formats.
|
|
Downloadable app |
Downloadable app |
|
Open source |
Open source |
|
License: AGPL-3.0 |
License: GPL-3.0 |
|
No account needed |
Not stated if an account is needed |
|
Offline features available |
Not stated if it works offline |
Sources for SuperSlicerCatalog checked September 21, 2026 |
Sources for mslicerCatalog checked September 22, 2026 |
“Not stated” means we have not confirmed it. Features can vary by device and plan.
Copy comparison link
