Teaching Tech 3D Printer Calibration

Web-based 3D printer calibration walkthrough with a gcode generator for custom test towers and prints.

FreeProprietaryWeb
Official websiteteachingtechyt.github.io

These buttons open the developer's own site, repository or store listing in a new tab. wares.gg does not host downloads.

About Teaching Tech 3D Printer Calibration

A companion site to the Teaching Tech YouTube calibration videos, organised as tabs you work through in order: frame check, PID autotune, extruder e-steps, first layer, baseline print, slicer flow, stepper driver current, temperature, retraction, speed and max flow, acceleration, linear advance and XYZ steps.

Its main feature is a gcode generator that builds test towers for your own printer configuration instead of relying on pre-sliced files. The site warns that generated gcode carries some risk and should be previewed in a slicer or gcode viewer before printing.

Strengths

  • Generates calibration gcode matched to your printer settings
  • Covers the full calibration sequence step by step
  • Paired with explanatory videos
  • Links each step to the relevant Marlin gcode documentation

Limitations

  • Generated gcode should be previewed before printing
  • Instructions are oriented around Marlin gcode commands

Details

Pricing
FreeFree to use, with an optional donation link.
License
Proprietary
Developer
Teaching Tech
Platforms
Web
How it runs
Web application
Best suited for
FDM printer owners working through calibration and tuning from scratch
Categories
3D printing
Last verified
Added
Provenance
Selected from the TechWalrus Resource Hub (3D Printing & Maker); facts checked against the developer's own pages, 2 sources on file.

Similar software

Related functionality, not necessarily a direct replacement.

Report a wrong fact or a dead link on this listing